TRUCK MOUNTED WIRE LINE UNITS
This wire line unit is a single reel type (upgradeable to double reel) with power taken from the truck engine through a PTO unit or with a separate power skid giving drive to the hydraulic power source of the winch mounted along with the reel skids. The unit can be provided with the combination of both PTO & separate power pack to use the truck engine for auxiliary drive in case the power pack develops some problem. It is designed to run 25,000 ft of 0.092" OD wire line. The design and operational features of this model are similar to those described in the earlier models to provide wide range of speeds and torque levels, with the provision of a 4-speed manual transmission and a pressure-compensated directional control valve in the power train. A house-type body is fabricated over the chassis to act as the operator's cabin. The under-structure is fabricated using pressed M.S. hot sections of 40x40x80mm of 14 BG. The outer paneling is of 16 BG aluminium sheet while inner paneling is made from laminated sheets fixed over 6mm plywood. The body is well ventilated and fitted with a rear sliding door, a side door and an inter connecting door into the driver's cabin. Also, insulation of 40mm  thermocole is provided in the body. Space is also provided in the body to locate tool boxes, two folding berths, 50 liters water tank, first aid-box, spare wheel, clamps for three manometers and control panel (housing all gauges, controls systems, valve levers, brakes with indicators etc). For ease of night operation, tube lights are fitted inside the operator's cabin and floodlight in front and rear on top of the winch.

Licence No.API 5CT-0565
Licence No.API 5L-0424
Licnece No.API 11V1-0014
Licence No. API-7-0393
Licence No.API-7-1-0393

Home | About Us | Wireline Winch Units | Gas Lift Equipments | Down Hole Tools | Handling Tools
Quality Certificates | References | Enquiry | Site Map