About Us
Wireline Winch Units
Gas Lift Equipments
Down Hole Tools
Handling Tools
Quality Certificates
References
Enquiry
Site Map

INTERCHANGEABLE SLEEVE STABILIZERS

FEATURES :

The “UDT MAKE”  Interchangeable sleeve stabilizer comes in two different types : One piece body constructions or with a two piece body with the sleeve blocked in the middle. Different size sleeve may fit same body. It is composed of a 4145 H  AISI heat treated steel mandrel and a sleeve made of special alloy steel. Hard facing on the blades can be any of the four different types  offered in section "Welded Blade Stabilizer".

This type of stabilizer is often used in fields where repairs and hard facing of the blades are not available and is thus a time and money saving tool.

ORDERING INSTRUCTIONS

  • Hole size and type of body construction-String/Near bit.

  • Drill Collar size.

  • Hardfacing choosen for the blade.

  • Connection type and size.

DIMENSIONAL DATA-INTERCHANGEABLE SLEEVE STABILIZERS
 

Hole size
Range (In)		 Sleeve (In) DC size
Range (In)		 Body
Length Blade
Width		 Bore (In) Centre Connection Fishing
Neck
Length (in)
6.1/8–6.3/4 14 2 4.1/8- 4.3/4 2- 2.1/4 2.7/8 IF 20
7.3/8–7.7/8 14 2.1/2 5.1/4- 5.3/4 2.13/16 3.1/2 IF 22

8.1/2–8.3/4

 14 2.1/2 6.1/4- 6.3/4 2.13/16 4 IF 22

9.1/2–14.3/4

 14 2.3/4- 3.1/8 7–8.1/4 2.13/16 4.1/2 IF- 6.5/8REG 22
14.3/4-17.1/2 18 3.1/8 9- 9.1/2 2.13/16 6.5/8REG 22
17.1/2-26 32 4 9- 11.1/4 2.13/16-3 7.5/8REG- 8.5/8REG 26

Licence No.API 5CT-0565
Licence No.API 5L-0424
Licnece No.API 11V1-0014
Licence No. API-7-0393
Licence No.API-7-1-0393
.

Home | About Us | Wireline Winch Units | Gas Lift Equipments | Down Hole Tools | Handling Tools
Quality Certificates | References | Enquiry | Site Map