DUMMY VALVES
"UDT Make" Dummy Valves are installed in side pocket mandrels by wireline to block the mandrel's injection gas ports. Dummies can be run prior to or after completion for testing tubing, packers and other equipment. In new installations, dummies can be retained in the mandrels until gas lift valves are required to maintain production. Then , dummies are pulled and gas lift valves installed by wireline. During the life of the well, gas lift valves installed above the fluid level can be replaced with dummies to block off injection gas. They are available in 1 and 1- 1/2 inch sizes.
EQUALIZING VALVES
“UDT Make”  Equalizing Valves with integral latches are designed to equalize tubing and casing  or circulate prior to pulling the valve. They are also available in both 1 and 1-1/2  inch sizes.

NOMINAL OD	PACKING OD
	UPPER	LOWER
1-1/2"	1-9/16	1-1/2"
1"	1-1/32	1-1/32
1-1/2"	1-9/16	1-1/2
1”	1-1/32	1-1/32
1-1/2"	1-9/16"	1-1/2
1"	1-1/32"	1-1/32"

 

Licence No.API 5CT-0565
Licence No.API 5L-0424
Licnece No.API 11V1-0014
Licence No. API-7-0393
Licence No.API-7-1-0393

Home | About Us | Wireline Winch Units | Gas Lift Equipments | Down Hole Tools | Handling Tools
Quality Certificates | References | Enquiry | Site Map